Dust Collectors - FB Model: FBP
Model FBP


The material enters the unit inlet and immediately enters the primary cyclonic separation section. Here, the heavier particles of the dust are removed and deposited either in the material storage or material discharge section.

The remainder of the dust and the air rises up into the secondary filtration section. Here the remainder of the dust is trapped in the filter media. When the filter is shaken after each operational cycle, the dust is deposited in the material storage or discharge section.

The air, after passing through the secondary filtration section, passes through the connector housing which includes the back draft and fire dampers, through the industrial exhaust fan, and either discharges to the atmosphere or is returned to the manufacturing area to conserve energy costs.

There is only one storage section in this unit. All the material is removed through a newly designed large discharge gate supplied as standard equipment for most applications. A double sized gate is supplied as standard equipment for most applications when bridging of stored materials could be a problem. The standard gate(s) is hand operated (powered optional) by chain through heavy duty gear reduction units for ease of opening and closing. This design allows for complete control of stored material flow into truck or storage container. It is practically trouble free and superior over most other designs.

Another main advantage with this type of system is that no material passes through the exhauster, only air.

Model FBP: Permits industrial plants to prevent air pollution while reclaiming heat and humidity. Other profitable results are air pressure equalization in the building, reduction of fire hazard, cleanup costs and annoying drafts.


  • High efficiency.
  • Low cost.
  • Flexible design.
  • Standardized construction.
  • Pull through design.
  • Both primary and secondary filtration.
  • One waste removal point.
  • Free standing.
  • Shipped factory prefit.
  • Low cost installation.
  • Truck load storage.
  • Automatic or continuous waste removal available.
  • Minimum space requirement.
  • Quiet operation.
  • Minimum maintenance.
  • Easy access.
  • Painted construction.
  • Electric shaking - standard.
  • Chain operated gear reduction (10 to 1) driven truck loading doors - standard, easily operated under all conditions.
  • Heavy duty construction.
  • Fire damper and back draft damper - standard.
  • Alternate filter media and/or air to cloth ratios are available.


Model FBP
  • W option reduces cost by increasing cloth area by as much as 60% in any FB Series
  • Dust Collector
  • Support structure
  • Automatic shaker
  • Pressure gauge
  • Bin level indicator
  • Electrical or air operated discharge door
  • Increased filter area
  • Increased bin capacity
  • Safety ladder and railing.
  • Cone bottom for constant waste removal
  • Rotary air lock discharge
  • Automatic material removal.
  • Exhaust fan separate or side mounted
  • Silencer
  • Various types of filter media
  • Spark detection/extinguishment systems

Available Models:

Unit Inlet 13" 15" 17" 19" 21" 23"
Motor (H.P.):
15 20 25 30 40 50
3,900 5,200 6,600 8,200 10,000 12,000
- A & C-
Unit Inlet 26" 29" 33" 38" 42"
Motor (H.P.):
60 75 100
15,000 19,000 24,800 26,000 35,000
- A & C - - A -
� Other motor sizes available
Model FBP


WebSite Design
by Galganov
N.R. Murphy Ltd